Motocross The Game Realistic Settings: A 70-Hour Setup Guide for Riders

Dial in Motocross The Game realistic settings: riding aids, steering, controller bindings, a Steam braking trick, FOV and graphics, based on player experience.

Motocross The Game is built to feel like the real thing, and that means the default setup rarely feels right. If you have ever tucked the front end in a corner or locked the rear wheel on a braking zone, you already know how unforgiving a simulator can be. Dialing in Motocross The Game realistic settings is the fastest way to turn that frustration into smooth, confident laps.

This guide is based on a player experience report from a rider who logged roughly 70 hours in early access and reached top-five and top-10 times on the 250 leaderboards. Treat the numbers below as a strong starting point, not gospel. The game is still developing, and updates may change what works best.

What "Realistic" Means in Motocross The Game

According to the official Motocross The Game website, the title is a hyper-realistic motocross simulator built on Unreal Engine 5, with PC, PS5 and Xbox Series X|S versions and cross-platform online competition. The team behind it describes itself as made up of current or former motocross racers, and that shows in the physics.

In practical terms, realistic settings mean you rely on your own skill instead of electronic help. Fewer riding aids give you more control, but they also demand smoother inputs. The player behind this setup stresses one point repeatedly: the game rewards smoothness on the analog stick, and aggressive, jerky steering makes the bike easy to lose.

Here is the philosophy in a nutshell:

  • Turn off assists that mask mistakes, so you learn the bike.
  • Keep one safety net where your hardware limits you.
  • Change one setting at a time and give it several sessions before judging.
  • Chase consistency before chasing lap times.

Riding Aids: Less Is More

Motocross The Game offers front ABS, rear ABS, traction control, anti-stoppie, anti-wheelie and an automatic gearbox. The rider in our source runs only one of them.

Riding AidSetting (player experience)Why
Front ABSOffFront brake is on an analog trigger, so you can modulate it
Rear ABSOnRear brake is a button, so it locks easily without help
Traction controlOffKeeps throttle feel honest
Anti-stoppieOffLets you control pitch yourself
Anti-wheelieOffSame reason
Automatic gearboxOffManual shifting with clutch control

The logic behind rear ABS is hardware-based. A button is essentially on or off, so a rear wheel can lock, chatter or slide under braking. Rear ABS smooths that out. The front brake, on the other hand, sits on an analog trigger you can squeeze gradually, so front ABS is unnecessary once you get comfortable.

This rider actually started with front ABS on during the first couple of days. That is a reasonable approach if you are new. Begin with more assistance, then peel it away one aid at a time.

Steering Settings: The Most Important Part of Your Setup

Steering is where many riders win or lose time. The setup described here uses these values:

Steering OptionValue UsedNotes
Steering gain+1Higher values (3 to 5) felt too sensitive
Sensitivity-4Adjust to -3 or -2 if you want quicker response
Linearity0Default response curve
Dead zone5Filters tiny stick drift

The rider tested gain values from negative 1 up to 5. At zero or negative 1, the bike barely turned. At 3 to 5, it became twitchy, especially when trying to carry momentum through corners. Positive 1 landed in the middle, with positive 2 flagged as a future experiment.

How to Tune Your Own Steering

  1. Start with the values above on a track you know well.
  2. Ride five to ten laps without touching the menu.
  3. If the bike feels lazy in tight corners, raise sensitivity one step (for example, -4 to -3).
  4. If the bike feels nervous on straights or in ruts, lower gain or sensitivity.
  5. Only change one value per session.

The key advice is patience. Constantly changing everything prevents your muscle memory from developing, and in a simulator that muscle memory is everything.

Controller Bindings That Reduce Fatigue

Bindings are personal, but there are some smart ideas worth borrowing. The setup below is for a PlayStation-style controller.

ActionBindingReason
ThrottleR2Analog control
SteeringLeft stickStandard
Rider leanRight stickStandard
Front brakeL2Analog modulation
Rear brakeL3 (left stick click)Brake tap in the air without moving your thumb
Sit/standL1Avoids holding right stick down
ClutchXFrees up L1 for sit/stand
Gear down / upCircle / Triangle (mapped to back paddles)Paddles on a Scuf-style controller

A few details stand out. First, placing the rear brake on L3 lets you tap it while airborne without taking your thumb off the steering stick. Rear brake taps help control the bike's pitch in the air, which matters on big jumps.

Second, the rider moved sit and stand off R3 because of a wrist injury. Holding a stick click for a 15-minute moto gets uncomfortable fast. If you feel hand strain, rethink your layout instead of pushing through it.

Third, use hold rather than toggle for sit and stand. The rider says another player recommended this, especially with Supercross on the horizon, where constantly switching between sitting and standing becomes more important.

The Steam Braking Trick

This is arguably the most useful tip in the whole video, and it applies to players on Steam. It uses Steam Input to create a combined brake without losing your independent rear brake.

Step-by-Step Setup

  1. Open your Steam library and find Motocross The Game.
  2. Click the controller icon, then choose Edit Layout.
  3. Go to Triggers and find the left trigger's Soft Pull command.
  4. Assign the Soft Pull to left stick click (L3).
  5. Keep your in-game rear brake bound to L3 as well.

The result: pulling the left trigger fully engages both front and rear brakes, which is helpful when slowing for a corner. Meanwhile, clicking L3 on its own still gives you the rear brake only, which is what you want for brake taps in the air. You never accidentally grab the front brake mid-jump.

There is also an option to add a clutch subcommand so the clutch pulls in whenever you brake. The rider tested it and does not recommend it. Pulling the clutch disengages the engine from the rear wheel, so you lose engine braking. The bike felt like it was free-rolling, and power returned inconsistently when the brake was released. Leave that subcommand off.

Camera, Video and Audio Settings

First-person riding improved a lot after the game added an FOV slider, according to the source rider.

CategorySetting UsedComment
Onboard 1 FOV120Wider view of the bike surroundings
Onboard 2 FOV120Same
Display modeBorderless windowedPersonal choice
Resolution2560x1440Likely monitor native
VSyncOffLower input latency
Frame rateUnlimitedDepends on your hardware
GraphicsHigh presetNo individual tweaking
Master volume50Game can get loud
Music30Keeps focus on engine sound
UnitsImperialMiles per hour

If 120 FOV feels too stretched, try 115 or lower. A wider field of view helps you see terrain and other riders, but it can make objects look farther away. Pick the value that lets you judge jump distances most reliably.

For graphics, the High preset is a sensible balance. If your frame rate drops, lower the preset before touching anything else, because stable frames matter more than visual polish when you are trying to hit consistent lines.

Do These Settings Actually Work?

Settings will not make you fast on their own, but results offer some proof of concept. After 70 hours, the rider reported being in the top 20 on five of six tracks on the 250 class. Here are the times mentioned in the video (all in seconds, as displayed on the leaderboards):

TrackTime MentionedApprox. Rank
Estrella MX106.1465th
Green Peaks121.28615th
Link Coping134.88910th
Roadby144.1344th
Pacific Crown233.18714th
Swedish Midsummer Carnage51.822nd

The official site lists the current world record at 1:05.287 on Estrella MX with a 250F on Steam, so even the best riders are still pushing limits. Keep in mind that leaderboards move quickly during early access.

One lesson from the shortest track is worth remembering. The rider admits to overriding corners on Swedish Midsummer Carnage, sliding out or tucking the front because a short lap tempts you to push every turn. Smooth beats aggressive, even when the lap is only 52 seconds.

FAQ

What are the best Motocross The Game realistic settings for beginners?

Start with rear ABS on and most other aids off, or keep front ABS on for your first few days if you need it. Use steering gain of +1 with sensitivity around -4 to -3, then adjust slowly. Remove assists one at a time as you gain confidence.

Should I turn off all riding aids in Motocross The Game?

Not necessarily. The player experience here favors keeping rear ABS because a button-based rear brake locks easily. If you have a pedal or analog rear brake, you may be comfortable without it. Test what helps your consistency.

How do I brake better on a controller?

Use an analog trigger for the front brake and consider the Steam Input soft pull trick to combine both brakes on a full pull, while keeping a separate rear brake button for aerial brake taps.

Will these settings change in future updates?

Likely. The game was close to its official launch when the video was recorded, and the rider explicitly warns that updates could change optimal settings. Revisit your setup after major patches and check the official site for news.