Motocross The Game Basic Cornering: A Beginner's Guide to Faster, Cleaner Turns
Learn Motocross The Game basic cornering: gentle inputs, front brake drag, downshifting, standing and berm tips to stop crashing and lap faster.
Corners are where most new riders crash in this simulator, and they are also where lap times are won. If you have been tucking the front end or looping out on exit, Motocross The Game basic cornering is the skill to fix first. The good news is that a handful of small habits, most of them about being gentler than you think, will make the bike feel predictable.
This guide draws on player experience from one early-release rider who posted a top 20 time on every track after about 50 hours, plus general riding principles. The game launched on November 16, 2026, so details may change with patches. The fundamentals of cornering in Motocross The Game, however, look likely to stay relevant.
Why Cornering Feels Different in Motocross The Game
Many early players come from MX Bikes, and that is where the trouble starts. In MX Bikes, community reports say you can slam the throttle, yank the bars and lean hard without much punishment. Motocross The Game is far less forgiving of that style. It sits closer to a simulation than an arcade title, but it has its own handling model.
Two things define it. First, the bike feels heavy. Its momentum pulls you around, so you need to plan your entry earlier and avoid sudden direction changes. Second, rider input is sensitive. The gap between zero lean and about 10% lean can be the difference between getting on the gas early and doing a loop-out into a crash.
Here is how the two mindsets compare:
| Habit | MX Bikes style | Motocross The Game style |
|---|---|---|
| Throttle | Slam it open | Roll on progressively |
| Rider lean input | Full deflection | Small, roughly 10% nudges |
| Entry speed | Charge in | Slow down, then build up |
| Line choice | Momentum-focused outside lines | Tight inside lines are viable |
| Bike feel | Light, flickable | Heavy, momentum-driven |
If you take only one thing from this table, make it this: treat the first few days like your first day on a real motorcycle. Slow, smooth and deliberate beats aggressive almost every time.
The Core Cornering Inputs
Keep Rider Input Small
Rider input controls your body position: leaning forward, back, left and right. Holding it at full deflection is the most common beginner mistake. Players report that tiny amounts, around 10%, are often enough to change how the bike behaves. If you are using a keyboard, tapping rather than holding helps. On a controller or wheel-style setup, use your analog range rather than slamming to the stops.
A useful drill is to ride a single corner ten times, using less rider input each lap, and note when the bike starts to feel stable.
Drag the Front Brake
The most valuable cornering tip from the reference material is to drag the front brake lightly through the turn. If the bike needs to pivot, a little front brake helps it rotate and also adds stability. The key word is "little." Squeeze too hard and the front wheel tucks, putting you on the ground.
Players say the front brake appears to include a very slight rear brake component, so you can ride competitively even without a separate rear brake bound. Still, binding the rear brake is worth testing if you want finer control.
| Front brake amount | Typical result |
|---|---|
| None | Bike runs wide, slow to rotate |
| Light drag (around 10%) | Better pivot, stable front end |
| Heavy squeeze | Front tuck and crash |
Use Gears Deliberately
Shifting matters more than you may expect. Based on player experience on the 250 (the recommended starting bike), you run out of gear quickly. Hitting the rev limiter slows the bike dramatically, so shift up often as you leave corners.
First gear is your friend for tight turns. The suggested sequence:
- Slow on entry and begin dragging the front brake.
- Downshift to first to help the bike rotate.
- Get on the throttle smoothly as the bike turns.
- Shift back to second quickly, because first gear is short.
Because the bike accelerates hard in a straight line, taking tighter inside lines can pay off here more than in momentum-heavy sims.
Corner Entry, Apex and Exit Step by Step
Breaking a corner into phases makes the inputs easier to remember. Think of it as slow in, rotate, then drive out.
| Phase | What to do | Common mistake |
|---|---|---|
| Entry | Brake early, stay upright, ease off speed | Carrying too much speed |
| Rotation | Light front brake drag, downshift if tight | Grabbing the brake too hard |
| Apex | Small lean input, eyes on exit | Overcorrecting with the bars |
| Exit | Roll on throttle, upshift quickly | Slamming the throttle and looping out |
Entry: Slow Down First
The community's blunt advice is to slow down. Entering a turn too fast forces large corrections, and large corrections are exactly what this game punishes. Pick a reference point, such as the start of the berm, and finish your heavy braking before it. You can always brake later once you know the limits.
Rotation and Apex
Once the bike is slowed, use the light front brake and a small lean input to turn it. Resist the urge to add more lean when the bike runs wide. Instead, release a touch of throttle or add a little more front brake, then re-apply smoothly.
Exit: Throttle, Standing and Shifting
On exit, the goal is traction. Rolling the throttle on gradually keeps the rear wheel hooked up. Shifting up quickly prevents the limiter from killing your drive.
Standing, Sitting and Traction
There is a standing mechanic similar to MX Bikes: standing and leaning forward can give more forward drive. However, one top player says it is harder to time here. Do it at the wrong moment and the rear end gets light, swaps and you crash.
On the other hand, standing at the right moment applies pressure through the pegs and pushes the rear down, helping the bike hook up and launch out of a corner. According to community reports, many leaderboard riders use the third-person camera and stand during exits, although the video's author prefers first person. Camera choice is personal, but third person may give you a better view of the rear wheel and berm.
A safe way to learn:
- Stay seated through the whole corner for your first sessions.
- Add standing only on long, straight exits.
- Avoid leaning forward while the rear is already unsettled.
- Compare lap times with and without standing.
Using Berms Without Crashing
Berms can help you carry speed, but there is a hard limit. If your front or rear tire goes just over the top of the berm, you will probably crash. Consistency wins races, so aim for the middle to upper-middle of the berm rather than the very rim.
| Berm position | Risk | Reward |
|---|---|---|
| Low on the berm | Low | Slower, wider arc |
| Mid berm | Low to medium | Good speed and control |
| Top edge | High | Crash if a tire crosses it |
If you keep washing out at the top, move your line a foot lower and reduce entry speed slightly. Smooth beats spectacular.
Practice Routine and Troubleshooting
Use the offline testing mode to repeat one corner. According to player experience, holding the reset button sets a marker on the track. Holding it again removes the marker, and a third hold moves it. Also, you must be crashed before reset will restart your lap, so if the restart is not working, crash first.
A simple 20-minute session:
- Pick one corner and set a marker before it.
- Do five laps focusing only on rider input size.
- Do five more focusing on front brake drag.
- Add the downshift to first for five laps.
- Finish with five laps adding a short stand on exit.
Troubleshooting common problems:
- Front tucks on entry: release front brake pressure and reduce lean.
- Bike runs wide: brake a bit earlier and try first gear.
- Loop-out on exit: open the throttle later and more gradually.
- Rear swaps while standing: sit back down and retry with better timing.
- Crashes at the berm top: lower your line.
Stay on the 250 for now. The 450 is much more demanding, and the experienced player quoted here recommends not rushing to it. For official news, patch notes and platform details, check the Steam store page for Motocross The Game and look for the latest updates, since the physics may be tuned after launch.
FAQ
What is the most important tip for Motocross The Game basic cornering?
Keep your inputs small. Roughly 10% rider lean and a light front brake drag are widely recommended by experienced players, because bigger inputs tend to cause front tucks or loop-outs.
Should I bind the rear brake?
It is optional. One top player rides with only the front brake bound, noting it seems to include a slight rear brake component. Try binding it if you want more control, but master the front brake first.
Why does my bike keep crashing on corner exit?
Usually it is a throttle or standing issue. Slamming the throttle can cause a loop-out, and standing while leaning forward at the wrong time can make the rear end swap. Roll on power smoothly and sit until your timing improves.
Which bike should beginners use to learn cornering?
Start with the 250. Players recommend staying on it before moving to the 450, since it is easier to learn gear use and cornering fundamentals there.
Related Guides
Motocross The Game Body Positioning: Master Weight Shift and Faster Laps
Learn Motocross The Game body positioning: when to stand, sit and shift weight in corners, whoops and jumps, with a practice plan to cut your lap times.
Motocross The Game Braking Guide: How to Drag the Front Brake and Stop Crashing
Master Motocross The Game braking with front-brake dragging, gear tips and input control. Learn how to pivot in corners without tucking the front end.
Motocross The Game Controller Setup: Best Settings, Bindings and Braking Tricks
Dial in your Motocross The Game controller setup with tested steering values, button bindings, a Steam braking trick, camera FOV and deadzone tips.
Motocross The Game Controls: Best Settings, Bindings and Braking Setup
Dial in Motocross The Game controls with tested steering values, controller bindings, riding aids, camera FOV and a Steam braking trick from player experience.