Motocross The Game Controller Setup: Best Settings, Bindings and Braking Tricks
Dial in your Motocross The Game controller setup with tested steering values, button bindings, a Steam braking trick, camera FOV and deadzone tips.
If you have ever launched a race and felt the bike twitch into every corner, your Motocross The Game controller setup is probably the problem, not your skill. The default layout and steering values leave many riders fighting the bike instead of flowing with it. A few well-chosen changes to riding aids, steering, bindings and braking can shave real time off your laps and make 15-minute motos far more comfortable.
This guide pulls together one rider's settings after roughly 70 hours in early access, plus community reports on deadzones and suspension. Treat every number as a starting point. The game is still receiving updates, so values may shift over time.
Why Your Motocross The Game Controller Setup Matters
Motocross The Game rewards smooth stick inputs. Jerky, aggressive steering makes it easy to lose the front end, especially when you are trying to carry momentum through a rut or berm. A controller has far less travel than a real handlebar, so small thumb movements translate into big bike reactions.
That is why settings like gain, sensitivity and deadzone carry so much weight. Get them right and the bike becomes predictable. Get them wrong and you will chase corrections all moto long.
Here is what a good setup should achieve:
- Smooth steering that does not overreact to small thumb movements
- Comfortable bindings that do not strain your hands over a long race
- Independent brake control so you can slow down on the ground and tap the rear brake in the air
- A clear view from your chosen camera
One important note: settings will not magically make you faster. You still need track knowledge and seat time. But a solid foundation removes friction so practice actually sticks.
Riding Aids: Less Is More
Many players choose to turn off most assists to feel the bike better. Community reports on controller discussions say that cutting aids such as flow assist and joint braking gives more control, though it takes practice to adjust.
The rider whose 70-hour setup we are referencing runs only one aid. He placed in the top ten on several 250 leaderboards with this configuration.
| Riding Aid | Setting Used | Why |
|---|---|---|
| Front ABS | Off | Analog trigger allows gradual braking |
| Rear ABS | On | Rear brake is a digital button, so it can lock up |
| Traction control | Off | More direct throttle feel |
| Anti-stoppie | Off | Full control over braking pitch |
| Anti-wheelie | Off | Manual throttle and weight management |
| Automatic gearbox | Off | Manual shifting for better control |
The logic is simple. If your rear brake sits on a button (an on or off input), you cannot squeeze it gradually, so rear ABS prevents lockups and chatter. Your front brake on an analog trigger can be feathered, so front ABS is less necessary.
If you are brand new, consider keeping extra aids on for your first few sessions, then removing them one at a time. Dropping everything at once is a recipe for frustration.
Steering Settings That Tame Twitchy Handling
Steering is arguably the most important part of the whole setup. The settings below worked well for one experienced rider, and they lean toward calm, controlled input.
| Steering Option | Value Used |
|---|---|
| Steering gain | +1 |
| Sensitivity | -4 |
| Linearity | 0 |
| Deadzone | 5 |
According to the rider, higher gain values around 3 to 5 felt far too sensitive, while 0 or -1 made it hard to turn the bike. Positive 1 was the sweet spot, and he may test +2 later. Sensitivity of -3 or -2 is a reasonable thing to try if -4 feels sluggish.
Deadzone Advice From the Community
Separate community discussion suggests many players find the default steering twitchy. Reported fixes include an inside deadzone of roughly 10 to 15 and an outside deadzone of roughly 60 to 90. A higher inside value ignores tiny stick drift, while a higher outside value softens the full-lock response. Note that the menu labels may differ from version to version, so test in a practice session.
A Simple Tuning Method
- Pick one value to change at a time.
- Ride the same track for at least three laps.
- Note whether the bike feels better or worse in tight corners.
- Keep the change only if lap consistency improves.
Resist the urge to rewrite everything every session. Giving your thumbs time to adapt is part of the process.
Button Bindings That Reduce Hand Strain
This is where personal comfort matters most. The layout below comes from a PlayStation-style controller, and the key idea is keeping your thumb on the steering stick while braking in the air.
| Action | Binding Used |
|---|---|
| Throttle | R2 |
| Steering | Left stick |
| Rider lean | Right stick |
| Front brake | L2 |
| Rear brake | L3 (left stick click) |
| Sit/stand | L1 |
| Clutch | X |
| Gear down / up | Circle / Triangle |
| Look | D-pad |
| Camera switch | D-pad up |
Why Rear Brake on L3 Works
Putting the rear brake on a left stick click lets you tap it mid-air without lifting your thumb off the steering stick. In motocross, a quick rear brake tap helps control the bike's pitch in the air, so easy access is valuable.
Sit and Stand Considerations
The rider originally placed the clutch on L1 and sit/stand on R3. A wrist injury made holding the right stick down uncomfortable over long motos, so he swapped them. If R3 feels fine for you, the classic layout is perfectly valid.
He also recommends using hold instead of toggle for sit and stand, partly to build habits that will carry over to Supercross-style riding down the road.
Paddles and Shifting
His gear up and gear down inputs are mapped to rear paddles on a Scuf controller. If you use a standard pad, choose face buttons or bumpers that you can reach without moving your thumbs off the sticks. Manual shifting is a popular choice among players looking for more control.
The Steam Braking Trick
This tip may be the biggest single upgrade for PC players using Steam Input. It lets one trigger pull apply both brakes while keeping a separate rear-only button for the air.
How to Set It Up
- Open your Steam library and find Motocross The Game.
- Click the controller icon, then choose Edit Layout.
- Go to the Triggers section.
- Under the left trigger, find the Soft Pull command.
- Assign soft pull to left stick click (L3).
Because L3 is also your in-game rear brake binding, a pull of the left trigger now engages front and rear brakes together, which is helpful when entering corners. In the air, you can still click L3 alone to apply only the rear brake.
Skip the Clutch Subcommand
Steam also lets you add a clutch subcommand to the brake input. The rider tested it and does not recommend it. Pulling the clutch each time you brake disconnects the engine from the rear wheel, so you lose engine braking. He described the bike feeling like it was free rolling, with power returning inconsistently when the brake was released.
This explains why rear ABS stays on in his setup: since the rear brake is effectively a button, ABS helps prevent the wheel from locking and sliding.
Camera, Video and Audio Settings
First-Person FOV
Since the update that added a field of view slider, first-person riding feels noticeably better for many players. The rider uses 120 FOV on both Onboard 1 and Onboard 2 for a wider view of the bike's surroundings. If 120 feels stretched or uncomfortable, try 115 or lower.
Video and Graphics
| Setting | Value Used |
|---|---|
| Display mode | Borderless windowed |
| Resolution | 2560x1440 |
| VSync | Off |
| Frame rate | Unlimited |
| Graphics | High preset |
Your hardware will determine what is realistic. If frame rate dips, drop the preset before touching resolution.
Audio and Interface
Because the game can get loud, he set master volume to 50, music to 30, and environment, bike and other bikes to 50 each. Units were switched to imperial for miles per hour. HUD, jersey name and race number are purely personal preferences.
Suspension and Technique Notes
Community reports suggest softening suspension for motocross and stiffening it for supercross, and using the right stick for body weight and preload. Also ease off the throttle before corners rather than gunning it in. Once steering feels settled, these tweaks help cornering and jump landings.
FAQ
What is the best Motocross The Game controller setup for beginners?
Start with moderate steering values such as gain +1 and a deadzone around 5, keep a few riding aids on, and gradually remove them. Put the rear brake somewhere you can press without leaving the steering stick.
Should I use hold or toggle for sit and stand?
One experienced rider recommends hold, since it builds habits that should translate to Supercross. If it strains your hand, adjust bindings to something comfortable.
Does the Steam braking trick work on non-Steam platforms?
It relies on Steam Input's soft pull feature, so it is specific to Steam. Console players can simply choose bindings that keep the rear brake reachable.
Will these Motocross The Game controller settings change after updates?
Possibly. The settings were recorded around launch on November 16, so updates may alter feel. Revisit your values after major patches and compare on your favorite track.
For official news and patch information, check the Motocross The Game page on Steam.
Related Guides
Motocross The Game Basic Cornering: A Beginner's Guide to Faster, Cleaner Turns
Learn Motocross The Game basic cornering: gentle inputs, front brake drag, downshifting, standing and berm tips to stop crashing and lap faster.
Motocross The Game Body Positioning: Master Weight Shift and Faster Laps
Learn Motocross The Game body positioning: when to stand, sit and shift weight in corners, whoops and jumps, with a practice plan to cut your lap times.
Motocross The Game Braking Guide: How to Drag the Front Brake and Stop Crashing
Master Motocross The Game braking with front-brake dragging, gear tips and input control. Learn how to pivot in corners without tucking the front end.
Motocross The Game Controls: Best Settings, Bindings and Braking Setup
Dial in Motocross The Game controls with tested steering values, controller bindings, riding aids, camera FOV and a Steam braking trick from player experience.