Motocross The Game Gear Selection: When to Use 1st vs 2nd Gear for Better Control

Learn Motocross The Game gear selection: when 1st or 2nd gear works best, how to pair gears with the clutch and throttle, and which control settings help.

Few things cost you more lap time in a dirt bike sim than picking the wrong gear at the wrong moment. In the early access build of Motocross The Game, Motocross The Game gear selection shapes how the throttle responds, whether your rear end slides out, and whether you clear the next jump. Get it right and your corners get cleaner, your starts get sharper, and your crashes drop.

This guide covers how to choose gears in Motocross The Game, based on one early access player's first 20 hours. Everything here is player experience from the build available since October 30, so details may change as development continues.

Why Gear Choice Matters So Much in This Game

In many motocross games, you can leave the bike in one gear and mostly forget it. Motocross The Game does not work that way. According to player experience from early access, the throttle has a slight delay, so power does not arrive instantly when you twist it. That makes your gear and RPM at corner exit much more important.

Think of gear selection as three decisions at once:

  • Power delivery: How much torque hits the rear wheel when you open the throttle.
  • Control: How easily you can feather the throttle without breaking traction.
  • Recovery: How quickly you can get RPM back after slowing down for a corner.

Because the game is still in early access, treat everything below as a starting point to test, not a permanent rulebook. The developers may tune throttle response, and the best gear for a given corner could shift with it. You can follow the latest news on the official Motocross The Game website.

The Core Idea in One Table

SituationSuggested gearWhy it helps
Tight 180-degree hairpin1stMore engine braking and easier throttle control
Open 90-degree corner2ndSmoother drive without needless revving
Corner exit before a big jump2nd plus clutchRestores RPM quickly for distance
Start gateClutch-assisted launchHelps you chase the hole shot

Choosing First Gear for Tight Corners

This is the most surprising part of Motocross The Game gear selection, especially if you ride real dirt bikes. One early access player found that second gear gave too much power too soon in slow corners because of how the throttle responds in this build. The result was a bike that stepped out or felt unstable before the rider was ready.

Dropping to first gear for true hairpins changed that. The player reported more engine braking and power that was easier to manage. In their words, the bike felt like it was "ready to slide" in second gear no matter what they did, while first gear gave more predictable throttle control.

When First Gear Works Best

Use first gear when:

  • The corner is a tight 180-degree turn.
  • You have slowed to a crawl and need controlled drive.
  • Your rear wheel keeps spinning or sliding on exit.

First gear is not always the fastest option. The same player was clear that second gear remains the right choice for wider corners, such as 90-degree turns. Think of first gear as a traction and control tool for the tightest sections, not a default.

A Simple Test to Run

Pick one hairpin on a track you know well. Run five laps in second gear, then five in first. Note your exit speed, how often the rear steps out, and your lap times. Your answer might differ from another player's, because riding style and controller settings play a big role.

Using Second Gear Without Overpowering the Bike

Second gear is your workhorse for most of the track. It suits faster, more open corners and the stretches between jumps. The key is not to treat full throttle as the only option.

Early access player experience suggests a few habits that make second gear far more manageable:

  1. Feather the throttle while leaned over. Grabbing a huge handful of throttle mid-lean is a common cause of sliding out.
  2. Add power gradually as you straighten the bike and settle into a better body position.
  3. Match throttle to the jump. A half-throttle approach in a higher gear can carry you surprisingly far, while rolling off too much can make you case the jump.

The takeaway is that gear choice and throttle input work together. A good gear with bad throttle habits still ends in a crash.

Pairing Gears With the Clutch

The clutch is the tool that makes gear selection practical in this build. Since the throttle can lag, you may exit a corner in second gear with RPM that has dropped too low to clear the next jump.

Instead of waiting for the engine to climb, the player in the reference video holds the clutch briefly, lets the RPM rise, then releases it. That quick "clutch pop" gets the bike moving again. One detail matters: if a quick tap does not seem to work, you may need to hold the clutch a bit longer than expected.

Where to Use the Clutch

MomentWhat to doResult
Corner exit, RPM lowHold clutch, rev up, releaseFaster drive toward the next jump
Start gateTime a clutch release off the gateBetter chance at a hole shot
Before a long gapClutch pop combined with a seat bounceExtra distance without extra speed

The same player credited a clutch release at the gate for their first-ever hole shot. If you want a better start, practice this on the starting gate before you worry about racing lines.

Seat Bouncing as a Companion Technique

Seat bouncing is not a gear technique, but it combines well with one. The approach is to sit as you reach the jump face, then stand at takeoff, using the suspension compression and rebound for extra lift. It helps most when you exit a corner and have little room to build speed. You can use it with or without the clutch, so try both.

Building a Control Setup That Supports Good Gear Choices

Your gear strategy only works if the controls let you reach the clutch and stand/sit inputs comfortably. The player in the reference video shared their personal setup, and they stressed it is a matter of preference, not a recommendation for everyone.

SettingValue usedNotes from the player
Gain+1Higher values felt twitchy; negative values made turning hard
Front sensitivity-2Helped reduce front-end tucks
Linearity0Left at default
Dead zone5Personal preference
AssistFront ABS onlyThe only assist they used
ClutchR1Easy to reach during corners
Sit/standL1Avoids pressing the right stick down

The remapping has a practical reason. The player had a wrist injury, and pressing the right stick during long streams was uncomfortable. Moving the clutch to R1 and sit/stand to L1 made these mechanics easier to use consistently. Even without an injury, putting your most frequent inputs on shoulder buttons can help you shift your focus to gear choice and body position.

How to Tune Your Own Settings

  • Change one setting at a time and ride at least three laps.
  • Watch for front-end tucks, which may signal the front is too sensitive.
  • If the bike feels twitchy on landings, lower the gain.
  • Keep a note of what works on each track.

Gear Selection, Body Position and Front-End Control

Gear choice cannot fix poor weight distribution. The same player's cornering routine shows how everything fits together, and it explains why their gear changes worked.

  • Brake early while standing and pulling back on the stick.
  • Stabilize the bike before you turn in.
  • Stay standing a little longer, then sit slightly later than feels natural.
  • Roll the left stick from back toward the turn direction as you enter.
  • Shift weight forward gradually through the corner.

Too much weight on the back can make the front wheel light and unstable. Pushing too aggressively forward while leaned can cause the front to knife in. Most front-end tucks in the player's experience came from doing too much at once: braking, leaning, shifting weight and getting back on the throttle before the bike was settled.

Landing Tips That Complement Your Gear Strategy

One more tip from player experience: landing slightly rear-wheel heavy tends to be more forgiving than a front-heavy landing. It helped when coming down from a big whip or when slightly overjumping. It will not save a jump that is wildly too long, but it can turn a crash into a recovery.

Practice Plan for Better Consistency

The reference video ends with a useful reminder. The game has six tracks in this build, and many players still cannot run three consistent laps on each. Instead of wishing for more content, use gear selection as a structured practice target.

StepFocusGoal
1Learn braking pointsBrake early and finish before turn-in
2Test gear per cornerCompare first and second gear in hairpins
3Practice clutch recoveryRestore RPM before key jumps
4Refine throttleUse partial throttle on jumps and exits
5Chain three clean lapsBuild consistency, not just speed

Keep a small log for each track listing which corners worked best in which gear. After a few sessions, you will have your own gear map, which is more valuable than any generic advice.

FAQ

What is the best gear for tight corners in Motocross The Game?

Based on early access player experience, first gear can work better in tight 180-degree turns because it offers more engine braking and easier throttle control. Wider corners, like 90-degree turns, often work fine in second gear. Test both on your own, since riding style matters.

Does Motocross The Game gear selection work with the clutch?

Yes. Because throttle response has some delay in the current build, many players use short clutch pops to raise RPM out of corners and at the start gate. If it does not seem to work, try holding the clutch slightly longer before releasing it.

Should I always use full throttle in second gear?

No. Players report that feathering the throttle while leaned over, then adding power as the bike straightens, helps prevent sliding. On jumps, partial throttle can sometimes carry you far enough, while too little can leave you short.

Will these gear tips change as the game updates?

Possibly. The game is in early access, and throttle response, clutch behavior and physics may change. Revisit your gear choices after major updates and check official channels for patch information.