Motocross The Game Rider Aids Explained: Which Assists to Use and Why

Learn how Motocross The Game rider aids work, which ones to turn on or off, and how one player pairs rear ABS with steering and brake setups.

Motocross The Game is built to be a hyper-realistic simulator, and that means a bike that punishes sloppy inputs. If you keep locking the rear wheel, looping out, or stalling off the gate, the right assists can save your lap times. Understanding Motocross The Game rider aids is one of the fastest ways to feel in control, whether you are a newcomer or a leaderboard chaser.

This guide breaks down each assist, shows how one experienced player configures them, and explains how aids connect to your steering, brake bindings, and camera. Everything here is based on the game's launch-period state, so settings may shift as updates arrive.

What Are Rider Aids in Motocross The Game?

Rider aids are optional assists found in the gameplay settings. They let the game take over part of what a real rider does with throttle, brakes, and body position. Based on a creator's walkthrough recorded just before the November 16 launch, the menu lists these toggles:

  • Front ABS
  • Rear ABS
  • Traction control
  • Anti-stoppie
  • Anti-wheelie
  • Automatic gearbox

Each one can be switched on or off independently. That matters, because the best setup is rarely "everything on" or "everything off." Many players mix and match depending on their controller, their braking technique, and how comfortable they are with each part of the bike.

The developers describe the game as a simulator made by riders, running on Unreal Engine 5 across PC, PS5, and Xbox Series X|S. In a simulation like this, aids are a learning tool as much as a safety net. You can use them to build confidence, then peel them away as your technique improves.

Quick Reference: What Each Aid Does

Rider aidWhat it helps withWho it suits
Front ABSReduces front-wheel lockup under brakingPlayers who slam the front brake
Rear ABSReduces rear-wheel lockup and chatterAnyone with an on/off rear brake button
Traction controlLimits wheelspin on loose dirtBeginners and wet or loose tracks
Anti-stoppiePrevents the rear wheel lifting under hard brakingNewer riders braking late
Anti-wheelieKeeps the front wheel down on throttlePlayers still learning throttle control
Automatic gearboxShifts for youThose who want to focus on lines

A Real Player Setup: Only Rear ABS

One useful data point comes from a YouTube creator who logged roughly 70 hours in early access and reached top-five and top-10 times on 250 leaderboards. According to that player experience, the rider aid configuration is minimalist: front ABS off, rear ABS on, and traction control, anti-stoppie, anti-wheelie, and automatic gearbox all off.

In other words, rear ABS is the only assist running. The player actually began with front ABS on during the first couple of days, then moved away from it once a better braking arrangement came together. That progression is worth noting. Many riders start with more help and gradually remove it as they learn the bike.

This is one person's preference, not an official recommendation. But it illustrates a sensible philosophy: keep the assist that fixes a real hardware limitation, and turn off the ones that limit your control.

Why Rear ABS Makes Sense on a Controller

The reasoning is practical. If your rear brake is mapped to a button, such as a stick click, it behaves like a switch. You cannot gradually squeeze it the way you can an analog trigger. Without help, the rear wheel can lock, chatter, or slide when you brake.

Rear ABS smooths that out. The front brake, by contrast, sits on an analog trigger, so you can feather it with precision. That is why the player left front ABS off while keeping the rear assist on. If your rear brake is on a trigger instead, you might find you do not need it.

Rider Aids and Your Steering Settings

Assists only solve part of the control puzzle. Steering settings decide how your inputs translate into lean and direction, and the two work together.

The same player reported these steering values:

SettingValue used
Steering gain+1
Sensitivity-4
Linearity0
Dead zone5

The player's key observation was that the game rewards smooth stick movement. Aggressive, jerky inputs make it easy to lose the bike, especially when carrying momentum through corners. Gain values around 3 to 5 felt too twitchy, while 0 or -1 made it hard to turn the bike at all. Positive 1 was the sweet spot, though the creator suggested other sensitivity values such as -3 or -2 may suit different styles.

How to Tune Steering Without Going Crazy

  • Change one value at a time, so you know what caused the difference.
  • Ride at least a few laps on the same track before judging a change.
  • Avoid constantly rewriting your settings; muscle memory needs time.
  • Start with moderate gain and adjust sensitivity second.

Brake Bindings That Work With Your Aids

Your assist choices make more sense when you look at how your brakes are bound. The player's controller layout offers a good example of thoughtful mapping.

ActionBinding used
ThrottleR2
SteeringLeft stick
Rider leanRight stick
Front brakeL2
Rear brakeL3 (left stick click)
Sit/standL1
ClutchX
Gear down / upCircle / Triangle (paddles on a Scuf)

Putting the rear brake on L3 lets you tap it in the air without moving your thumb off the steering stick. In motocross, a rear brake tap in the air helps control the bike's pitch, so this placement is useful for jumps.

The Steam Soft Pull Trick

On Steam, the creator also described using the controller layout editor to assign the left trigger's soft pull to the L3 click. The result: pulling the left trigger gently can apply both brakes together for corner entry, while clicking L3 on its own still applies only the rear brake in the air. Credit went to a TikTok streamer for showing the method.

The player also tested a clutch subcommand that pulls the clutch whenever you brake, but did not recommend it. Disengaging the engine removes engine braking, and the bike felt like it was free rolling, with power returning inconsistently when the brake was released. Treat this as community reports from one rider rather than a rule, and test it yourself.

Hold vs. Toggle for Sit and Stand

The same creator suggested using hold instead of toggle for sit and stand, noting that another player recommended it with Supercross in mind. It is a small change, but it keeps body position tied to a deliberate input.

How to Decide Which Rider Aids to Keep

A good way to approach Motocross The Game rider aids is to treat them as training wheels you remove one at a time. Here is a simple progression.

  1. Start with a comfortable baseline. Turn on the assists that stop you from crashing constantly, such as traction control and the ABS options.
  2. Practice on one track. Pick a short, familiar layout and ride consistent laps.
  3. Remove one aid at a time. Anti-wheelie and anti-stoppie are good candidates once your throttle and brake control improve.
  4. Keep what solves a hardware problem. If your rear brake is a button, rear ABS may stay on permanently.
  5. Re-test after updates. The game was still developing at launch, so physics and handling may change.
Skill stageSuggested approach
Brand newMost aids on, automatic gearbox optional
ComfortableTurn off anti-wheelie and anti-stoppie
IntermediateTraction control off, ABS selective
CompetitiveMinimal aids, tuned bindings

Remember that assists do not magically make you faster. The creator was clear that settings alone will not replace learning the tracks and getting comfortable with the bike. Consistency came from practice, and even a top-five lap on Estrella MX required finding small gains lap after lap.

Common Mistakes

  • Turning everything off too early and fighting the bike.
  • Leaving every aid on and never learning braking technique.
  • Changing steering and aids at the same time.
  • Pushing too hard on short tracks and sliding out; the player admitted this was a weakness on one compact layout.

Camera and Other Settings That Support Control

While not rider aids, a few other options affect how well you ride. The player used a 120 field of view on both onboard cameras after the FOV slider was added, for a wider view of the bike's surroundings. You can try lower values like 115 if 120 feels too stretched.

For performance, the creator ran borderless windowed, VSYNC off, an unlimited frame rate, and the high graphics preset. Steady frame rates help you judge corners and landings, which indirectly supports better control.

For more on the game itself, visit the official Motocross The Game website, where the team shares development news, leaderboards, and community links.

FAQ

What are the best Motocross The Game rider aids for beginners?

There is no official best combination, but beginners often benefit from keeping traction control and ABS on while learning, then removing anti-wheelie and anti-stoppie as throttle and brake control improve. Adjust based on what causes you to crash most.

Should I use rear ABS in Motocross The Game?

If your rear brake is on a digital button like a stick click, rear ABS can prevent lockups and chatter. One experienced player runs it as their only aid for that reason. If your rear brake is on an analog trigger, you may not need it.

Do rider aids make you slower?

Not necessarily. Aids can keep you consistent while you learn, but experienced players often turn them off to gain more control. Practice and track knowledge matter more than any single setting.

Will these settings change after updates?

Quite possibly. The game was in active development around its November 16 launch, and the creator noted settings could change as updates arrive. Revisit your Motocross The Game rider aids and bindings after major patches.