Motocross The Game Best Settings: Riding Aids, Controls, Camera and Braking Setup

Motocross The Game best settings after 70 hours: riding aids, steering values, controller bindings, a Steam braking trick, FOV and video options.

Your first ride in a new simulator can feel like wrestling a bike that wants to throw you over the bars. The fastest way to calm things down is to dial in your setup before you chase lap times. This guide walks through the Motocross The Game best settings, based on one rider's 70-hour setup from early access, so you can start from a proven baseline instead of guessing.

Motocross The Game is a hyper-realistic motocross simulator built on Unreal Engine 5, available on PC, PS5 and Xbox Series X|S. The settings below come from a player who posted top-five and top-10 times on the 250 leaderboards. Treat them as player experience, not official recommendations, and expect tweaks as the game updates.

Why Your Settings Matter in Motocross The Game

The game rewards smooth inputs. According to the rider whose setup we are following, aggressive stick movements make it easy to lose control, especially when you try to carry momentum through corners. That means your steering curve, braking layout and riding aids have a bigger effect on consistency than any single hot lap trick.

Settings will not make you fast by themselves. You still need to learn the tracks and build bike control. But a comfortable setup removes friction, so practice time actually turns into improvement.

A quick note on timing: the video was recorded just days before the official launch on November 16, and the developers continue to ship updates. Menu options, defaults and even ideal values may change. The official Motocross The Game website posts news and development updates, so check it when a patch lands.

Setting CategoryWhy It MattersPriority
SteeringControls how smoothly the bike turnsVery high
Braking layoutAffects corner entry and air controlVery high
Riding aidsChanges how forgiving the bike feelsHigh
Camera FOVImproves awareness and comfortMedium
Video and audioFrame rate, clarity, loudnessMedium

Riding Aids: Keep Them Minimal

The reference setup uses almost no assists. Here is what the rider runs:

Riding AidSetting
Front ABSOff
Rear ABSOn
Traction controlOff
Anti-stoppieOff
Anti-wheelieOff
Automatic gearboxOff

Rear ABS is the only aid left on. The rider actually started with front ABS enabled during the first couple of days, then switched. The reason ties directly to the braking layout covered below.

Should Beginners Copy This?

Not necessarily. If you are brand new, consider leaving traction control or anti-wheelie on while you learn throttle control, then turn aids off one at a time. Dropping everything at once makes it hard to tell what is causing a crash. The goal is a setup where you control the bike, not one that fights you.

A sensible progression looks like this:

  • Start with the aids you need to finish laps without crashing.
  • Remove one aid per session.
  • Note how corner exits and landings change.
  • Keep rear ABS if you brake with a button rather than a trigger.

Steering Settings That Reward Smooth Inputs

Steering is described as one of the most important parts of the setup. The rider's values after plenty of experimentation:

Steering OptionValue
Steering gain+1
Sensitivity-4
Linearity0
Dead zone5

The rider tried higher gain values of three to five and found the bike too twitchy. Going down to zero or -1 made it hard to turn at all. So +1 became the sweet spot, with a possible future test at +2.

Sensitivity at -4 is personal preference. Try -3 or -2 if the bike feels lazy. The bigger advice is to pick a configuration and stick with it long enough to build muscle memory. Changing values every session makes it impossible to tell whether you are improving.

How to Tune Your Own Steering

  1. Start with the reference values.
  2. Ride one track for 10 to 15 laps without changing anything.
  3. If the front end tucks or you slide out, lower gain or sensitivity.
  4. If you cannot make tight turns, raise one value by a single step.
  5. Retest for a full session before changing again.

Dead zone matters if your analog stick drifts. A small dead zone such as 5 filters out tiny unintended movements without making the stick feel numb.

Controller Bindings and the Steam Braking Trick

The controller layout is where this setup becomes unusual, and where players can gain the most.

ActionBinding
ThrottleR2
SteeringLeft stick
Rider leanRight stick
Front brakeL2
Rear brakeL3 (left stick click)
Sit/standL1
ClutchX
Gear downCircle (paddle)
Gear upTriangle (paddle)

The rear brake sits on L3 so the rider can tap it in the air without lifting a thumb from the steering stick. In motocross, a rear brake tap helps control the bike's pitch in the air, so easy access matters.

The sit/stand and clutch arrangement was driven by a wrist injury. Holding right stick down for a 15-minute moto became uncomfortable, so the rider moved sit/stand to L1 and clutch to X. The earlier layout, clutch on L1 and sit/stand on R3, worked fine and is still a valid option.

Hold Instead of Toggle

The rider recommends using hold rather than toggle for sit/stand, citing advice from another player about preparing for Supercross. Holding the button feels more natural for ongoing body position changes.

The Steam Soft Pull Setup

This is the headline tip, credited by the rider to a TikTok streamer named Liquid. On Steam:

  1. Open Motocross The Game in your Steam library.
  2. Click the controller icon.
  3. Choose Edit Layout.
  4. Go to Triggers.
  5. Under the left trigger, find the Soft Pull command.
  6. Assign Soft Pull to left stick click (L3).

Now, when you pull the left trigger, you get front and rear braking together. Because the rear brake is still bound to L3 independently, you can click L3 alone in the air for a rear-only brake tap. You get combined braking into corners and pure rear braking mid-air.

The rider also tested a Steam clutch subcommand that pulls the clutch automatically when braking, and does not recommend it. Disengaging the engine from the rear wheel removes engine braking. In testing, the bike felt like it was free rolling, and power returned inconsistently when the brake was released.

Why Rear ABS Fits This Layout

Since L3 is a button, the rear brake is effectively on or off. You cannot squeeze it gradually like a trigger. Without ABS, the rear wheel can lock up, chatter or slide under braking. Rear ABS smooths that out, while front ABS stays off because the analog trigger offers fine control.

Camera, Video and Audio Settings

For first-person riding, the rider runs a 120 field of view on both Onboard 1 and Onboard 2. A FOV slider arrived in an update, and the wider view made first-person riding feel better, with more awareness of the bike's surroundings. You can try 115 or lower if 120 feels stretched.

OptionReference Value
Display modeBorderless windowed
Resolution2560x1440 (as described)
VSyncOff
Frame rateUnlimited
GraphicsHigh preset
Master volume50
Music30
Environment50
Bike50
Other bikes50
UnitsImperial

The rider did not tweak individual graphics options, just used the High preset. If your frame rate dips, lower a preset rather than accepting stutter, since consistent frame timing helps with precise inputs. VSync off and an uncapped frame rate reduce input delay on capable PCs, though they can cause tearing on some displays.

Audio is a personal call. The game can get loud, so lowering master volume to 50 and music to 30 keeps engine sounds clear without fatigue. HUD, jersey name and race number are cosmetic or preference choices.

What These Settings Delivered on the Leaderboards

The rider reported results on the 250 class after 70 hours, with five of six tracks inside the top 20:

TrackReported Result
Estrella MX1:06.146, fifth
Green Peaks1:21.286, 15th
Link Coping2:14.889, 10th
Roadby2:24.134, fourth
Pacific Crown3:53.187, about 14th
Swedish Midsummer Carnage51.8 PB, 22nd

Times are written from the spoken figures in the video, so treat the minute formatting as approximate. For context, the official site listed a world record of 1:05.287 at Estrella MX on a 250F on Steam when the page was captured.

The takeaway is that consistency matters. On the short Swedish track, the rider kept pushing every corner and sliding out. A calm setup helps, but discipline matters too.

Practical Tips for Building Your Own Setup

  • Change one thing at a time and ride at least a full session.
  • Write down your values so you can revert.
  • Use a layout that avoids wrist strain over long motos.
  • Practice rear brake taps in the air on a simple jump first.
  • Revisit settings after major updates.
  • Share what works in the community; the developers invite feedback through Discord.

FAQ

What are the Motocross The Game best settings for beginners?

Start with the reference values: steering gain +1, sensitivity -4, linearity 0 and dead zone 5, then adjust gradually. Beginners may want to keep traction control or anti-wheelie on at first, then remove aids one at a time.

Should I turn on ABS?

In the player experience described here, rear ABS is on and front ABS is off. Rear ABS helps if your rear brake is a button, because it prevents lockup and sliding.

How do I set up the Steam soft pull braking trick?

Open the controller layout editor for the game in Steam, go to Triggers, and map the left trigger's Soft Pull to left stick click. Keep the rear brake on L3 too, so you can still use rear-only braking in the air.

What FOV is best for first person?

The rider uses 120 on both onboard cameras. If that feels too wide, try 115 or a bit lower. These Motocross The Game best settings are preferences, so test what keeps you comfortable and aware.