Motocross The Game Controller Settings: Best Setup for Control and Braking
Dial in your Motocross The Game controller settings: riding aids, steering values, button bindings, a Steam braking trick, and camera tips from a 70-hour setup.
Your first hour in Motocross The Game can feel humbling. The bike washes out in corners, the rear wheel locks up under braking, and every landing seems to go sideways. The good news is that most of those problems come down to your Motocross The Game controller settings, not your skill. This guide walks through a setup built on roughly 70 hours of early-access play, with every value explained so you can adapt it to your own style.
A quick note before we start: the game launched on November 16, and updates will keep changing things. Treat the numbers below as a strong starting point, not gospel. Everything here is based on one rider's experience (a player who reported top-five and top-10 results on the 250 leaderboards), so it is player experience rather than official guidance.
Why Your Controller Settings Matter So Much
Motocross The Game rewards smooth inputs. According to player experience, aggressive stick movements make it easy to lose the front end, especially when you are trying to carry momentum through a corner. Default values do not suit everyone, so a few small changes to steering, bindings and braking can make the bike feel far more predictable.
Settings will not make you fast on their own. You still need to learn the tracks and build bike feel. But a comfortable setup removes friction, which lets you focus on lines, braking points and rhythm sections instead of fighting the controller.
Here is what we will cover:
- Riding aids and which ones to keep
- Steering values (gain, sensitivity, linearity, dead zone)
- Button bindings for a standard controller
- A Steam Input trick for better braking
- Camera, video and audio settings
Riding Aids: Less Is More
The reference rider runs almost everything off. The only aid enabled is rear ABS. Traction control, anti-stoppie, anti-wheelie and the automatic gearbox are all disabled, and so is front ABS.
| Riding Aid | Reference Setting | Why |
|---|---|---|
| Front ABS | Off | Analog trigger gives fine front-brake control |
| Rear ABS | On | Rear brake is a button, so it locks easily |
| Traction Control | Off | More direct throttle response |
| Anti-Stoppie | Off | Full control of bike pitch |
| Anti-Wheelie | Off | Full control of bike pitch |
| Automatic Gearbox | Off | Manual shifting and clutch use |
The logic is simple. Your front brake sits on an analog trigger, so you can squeeze it gradually. The rear brake, in this setup, is a digital click, so it is basically on or off. Without rear ABS, the rear wheel can lock, chatter or slide under braking. Turning rear ABS on cleans that up.
If you are brand new, it is reasonable to start with front ABS on, as this rider did in the first few days, and then turn it off once your trigger control improves.
Should Beginners Copy This?
Not necessarily. Anti-wheelie and traction control can help while you learn throttle control. Try turning them off one at a time as you stop needing them, rather than dropping every aid at once.
Steering Settings That Reward Smooth Riding
Steering is arguably the most important part of any Motocross The Game controller settings setup. These are the values the reference rider settled on after testing many combinations.
| Steering Option | Value |
|---|---|
| Steering Gain | +1 |
| Sensitivity | -4 |
| Linearity | 0 |
| Dead Zone | 5 |
A few lessons from that testing:
- Gain of 3 to 5 felt too twitchy. The bike reacted too quickly to small stick movements.
- Gain of 0 or -1 felt too lazy. It was hard to get the bike to turn at all.
- +1 was the sweet spot, with +2 left as a future experiment.
- Sensitivity of -4 is personal. Try -3 or -2 if you want a more responsive bike.
The biggest piece of advice is to commit. Pick a setup, ride with it for several sessions, and only then adjust. Changing values every lap prevents your muscle memory from forming.
How to Tune Your Own Values
- Start with the values above.
- Ride one track for at least 30 minutes without touching the menu.
- Note whether the bike feels too slow to turn or too twitchy.
- Change only one value, by one step.
- Repeat after another full session.
Controller Bindings: A Layout Built Around Comfort
Button layout is where setups differ most. Here is the reference layout for a PlayStation-style controller.
| Action | Binding |
|---|---|
| Throttle | R2 |
| Steering | Left stick |
| Rider lean | Right stick |
| Front brake | L2 |
| Rear brake | L3 (left stick click) |
| Sit/Stand | L1 |
| Clutch | X |
| Gear down | Circle |
| Gear up | Triangle |
| Look | D-pad |
| Camera switch | D-pad up |
Why the Rear Brake Is on L3
Putting the rear brake on L3 means you can tap it in the air without lifting your thumb from the steering stick. Rear brake taps are used to control the bike's pitch in the air, so quick access matters on jumps.
Sit/Stand and Clutch Placement
The rider originally used clutch on L1 and sit/stand on R3. A wrist injury made holding a right-stick click through a long moto uncomfortable, so the two were swapped: sit/stand to L1 and clutch to X. If you have no comfort issues, the original layout works fine.
Another tip: use hold rather than toggle for sit/stand. The rider mentioned that a well-known community player recommended getting used to hold, especially with Supercross expected later. It keeps your body position tied to a deliberate input.
Paddles and Shifting
The shifting buttons above are mapped to back paddles on a Scuf controller. On a standard pad, choose any two face or shoulder buttons you can reach without moving your thumbs off the sticks.
The Steam Braking Trick
This is the most interesting tip in the setup, and it applies if you play on Steam using Steam Input.
How to Set It Up
- Open your Steam library and find Motocross The Game.
- Click the controller icon.
- Choose Edit Layout.
- Open the Triggers section.
- Under the left trigger, find the soft pull command.
- Assign soft pull to left stick click (L3).
What It Does
Because L3 is also your in-game rear brake binding, pulling the left trigger now applies both front and rear brakes together. Clicking L3 on its own still applies only the rear brake.
That split is the key. Into a corner, you get combined braking from one trigger. In the air, you can still tap only the rear brake to adjust pitch, without accidentally grabbing the front.
| Situation | Input | Result |
|---|---|---|
| Braking into a corner | Pull L2 | Front and rear brakes |
| Adjusting pitch in the air | Click L3 | Rear brake only |
| Gentle front-only braking | Light L2 (before soft pull) | Front brake |
Skip the Clutch Subcommand
Steam also lets you add a clutch subcommand to the brake input. The reference rider tested it and advised against it. Pulling the clutch every time you brake disengages the engine from the rear wheel, which removes engine braking. The bike felt like it was free-rolling, and power returned inconsistently when the brake was released. Results may differ for you, but it is worth testing carefully.
Camera, Video and Audio Settings
First-Person Camera
After the update that added an FOV slider, the rider set both Onboard 1 and Onboard 2 to 120 FOV. A wider view makes it easier to see the surroundings. If 120 feels distorted, try 115 or lower. This is purely preference.
Video and Graphics
| Setting | Value |
|---|---|
| Display mode | Borderless windowed |
| Resolution | 2560x1440 (as described) |
| VSync | Off |
| Frame rate | Unlimited |
| Graphics | High preset |
Unlimited frame rate with VSync off reduces input delay on strong PCs, but may cause screen tearing. If your hardware struggles, lower the preset before touching anything else.
Audio and Interface
- Master volume 50, music 30, environment 50, bike 50, other bikes 50 (the game can be loud)
- Units set to imperial (mph); metric is fine if you prefer it
- HUD, jersey name and race number are cosmetic or personal choices
Putting the Settings to the Test
The reference rider reported results on the 250 leaderboards: fifth at Estrella MX (1:06.146), fourth at Roadby (2:24.134), tenth at Link Coping (2:14.889) and fourteenth at Pacific Crown (3:53.187). The short Swedish Midsummer Carnage track was a weak spot, mostly from pushing too hard and sliding out. These are individual results, and leaderboards shift constantly.
The lesson is consistency: smooth inputs, one rear aid, and a braking setup that suits your thumbs.
For official news, patch notes and platform details, check the game's page on Steam.
FAQ
What are the best Motocross The Game controller settings for beginners?
Start with a steering gain of +1, sensitivity around -4 to -2, and keep rear ABS on. Add front ABS if you struggle with the front brake, then remove aids gradually as your control improves.
Should I use hold or toggle for sit and stand?
Community reports suggest hold is worth learning, especially with Supercross expected later. It ties your body position to a deliberate input, though toggle is fine if hold hurts your hands.
Why put the rear brake on L3?
It lets you tap the rear brake in the air without taking your thumb off the steering stick, which helps you control pitch on jumps.
Do these Motocross The Game controller settings work on consoles?
The steering values, riding aids and bindings apply anywhere. The soft pull braking trick relies on Steam Input, so it is PC-only.
Related Guides
Motocross The Game Best Settings: Riding Aids, Controls, Camera and Braking Setup
Motocross The Game best settings after 70 hours: riding aids, steering values, controller bindings, a Steam braking trick, FOV and video options.
Motocross The Game Camera Settings: Best FOV, Views and Setup Tips
Dial in Motocross The Game camera settings with a 120 FOV first-person setup, camera switching tips, plus steering, brake and video options that help.
Motocross The Game FOV Settings: Best Field of View and Camera Setup
Dial in your Motocross The Game FOV settings. Learn why 120 FOV works in first person, plus steering, braking and controller tips from player experience.
Motocross The Game FOV Slider: What Changed and How to Use It
The Motocross The Game FOV slider widens the first-person view up to 120. See what the update changed, which camera to use, and how to practice with it.