Motocross The Game Camera Settings: Best FOV, Views and Setup Tips

Dial in Motocross The Game camera settings with a 120 FOV first-person setup, camera switching tips, plus steering, brake and video options that help.

Your camera is the first thing that shapes how a bike feels in Motocross The Game. A view that is too narrow hides the berm you need to hit, and one that is too cramped makes every corner feel like a guess. Getting your Motocross The Game camera settings right can make you calmer, more consistent and faster, even before you touch a single control binding.

This guide walks through the first-person field of view (FOV) setup that one veteran player settled on after roughly 70 hours in early access, plus the camera presets, controls, steering and video options that work alongside it. Everything here is based on player experience and community reports from around the November 16 launch, so treat the numbers as starting points rather than rules.

Why Camera Settings Matter in Motocross The Game

Motocross is a game of reading terrain: ruts, braking bumps, jump faces and the line the rider ahead just carved. Your camera decides how much of that information you see and how early you see it.

Player experience from early access suggests the game rewards smooth, deliberate inputs. If you are constantly jerking the analog stick, the bike gets unsettled quickly, especially when you try to carry momentum through corners. A camera that lets you see more of the track ahead helps you plan smoother lines instead of reacting late and over-correcting.

Cameras also affect comfort. A wide field of view can feel more natural in first person because you see more of what is happening around the bike, while a narrow one can feel like looking through a tube. Since a moto can last around 15 minutes, comfort over a long session matters as much as raw lap time.

The game has gone through several updates around launch, including an FOV slider for first-person riding and, according to community clips, new camera presets. Because the title is still evolving, expect some options to move or change names.

Best First-Person Camera Settings

The most talked-about first-person tweak is the FOV slider. After it was added, first-person riding became much more usable for many players. One high-ranking 250 rider reported running 120 FOV on both onboard cameras and finding it the most comfortable choice.

Onboard 1 and Onboard 2

The game offers two onboard views, and the FOV can be set separately for each. The player we referenced keeps both at 120 so the view does not change when switching between them.

CameraSuggested FOVWhy it works
Onboard 1120Wide view, better awareness of the bike's surroundings
Onboard 2120Keeps the same feel when you swap views
Comfort alternative115 or lowerLess edge distortion if 120 feels stretched

If 120 feels too wide or gives you a stretched sensation at the screen edges, drop to 115 and test a few laps. Change one value at a time so you can tell what helped.

How to Test a New FOV

Do not judge a camera in a single lap. Use a simple routine:

  • Pick one track you know well, such as a short one with plenty of corners.
  • Ride at least 10 laps with the new FOV before deciding.
  • Note whether your braking points feel earlier or later than normal.
  • Check whether jump faces and landings are easier to judge.
  • Only then adjust by 5 degrees and repeat.

Your sense of speed changes with FOV. A wider view makes the world feel slower, so your first few laps may feel strangely calm even when your times are fine. Give your eyes time to adapt.

Camera Switching and Presets

Switching views quickly is useful when you want to compare perspectives or reset your sense of the track. In the reference setup, camera switching is mapped to D-pad up, and the look controls sit on the D-pad too. That keeps both thumbs free for steering and rider lean.

A short TikTok clip from creator Boxule in October highlighted newly added camera presets. The clip did not include detail we can verify, so check the in-game camera menu yourself to see which presets are available on your build. Patch notes can change what is offered.

Here is a practical way to use multiple views:

SituationSuggested viewReason
Learning a new trackThird personEasier to see line choice and bike position
Setting a leaderboard timeFirst personStronger sense of speed and corner entry
Recording footageThird person or onboardClean clips for sharing
Fatigue or long motosWhichever feels calmestComfort keeps your inputs smooth

There is no single correct view. Many players start in third person to understand a layout, then move to first person once the lines are memorized.

Controls and Riding Aids That Pair With Your Camera

A great camera will not help if your controls fight you. The reference player's setup shows how bindings and camera comfort go together.

Riding Aids

Only one aid was active: rear ABS. Front ABS, traction control, anti-stoppie, anti-wheelie and automatic gearbox were all off. The reasoning was that the rear brake sits on a stick click, which is an on or off input, so rear ABS prevents the rear wheel from locking and chattering. The front brake sits on an analog trigger that can be squeezed gradually, so front ABS was not needed.

Steering Values

SettingValue usedNotes
Steering gain+1Higher values (3 to 5) felt too sensitive
Sensitivity-4Try -3 or -2 if you want quicker response
Linearity0Default-style response
Dead zone5Filters tiny stick drift

Gain at 0 or -1 made it hard to turn the bike, while 3 to 5 was twitchy. The takeaway is to find a middle ground and stay with it long enough to build muscle memory.

Controller Bindings

The layout below is one player's controller setup, built around a wrist injury:

  • Throttle: R2
  • Steering: left stick
  • Rider lean: right stick
  • Front brake: L2
  • Rear brake: L3 (click the left stick)
  • Sit and stand: L1
  • Clutch: X
  • Gear down and up: circle and triangle, mapped to rear paddles on a Scuf controller

Putting the rear brake on L3 lets you tap it in the air without lifting your thumb off the steering stick. Rear brake taps help control the bike's pitch in the air. Another tip from the same source: use hold rather than toggle for sit and stand, since the community expects Supercross to reward that habit.

The Steam Braking Trick

On Steam, open the controller icon in your library entry, choose edit layout, and go to triggers. Assigning the left trigger's soft pull to L3 means a trigger pull applies both brakes into corners, while a direct L3 click still gives rear-only braking in the air. The player advised against adding a clutch subcommand to braking, because disengaging the clutch removes engine braking and made power return feel inconsistent.

Video, Audio and Interface Settings

Your display options affect how clear and responsive the camera feels. The reference setup used:

OptionValue
Display modeBorderless windowed
Resolution2560 by 1440
VSyncOff
Frame rateUnlimited
GraphicsHigh preset

The transcript lists the resolution loosely, so 2560 by 1440 is the likely intended value; confirm what your monitor supports. VSync off and an unlimited frame rate can reduce input delay, but they may cause screen tearing on some displays. If tearing bothers you, cap your frame rate near your monitor's refresh rate.

For audio, the player used master 50, music 30, and environment, bike and other bikes at 50 each, noting the game gets loud. Sound is part of your camera feel too, since engine pitch helps you judge speed when your FOV is wide. Units were set to imperial, and the HUD, jersey name and race number are personal choices.

Putting It Into Practice

Settings do not replace seat time. The reference rider reported top-five and top-10 results on the 250 leaderboards, including a 106.146 lap at Estrella MX and a 144.134 at Roadby, but stressed that practice and track knowledge still matter most.

A simple plan for your first week:

  1. Set both onboard cameras to 120 FOV.
  2. Turn on rear ABS only and test your brake bindings.
  3. Start with steering gain +1 and sensitivity -4.
  4. Ride 10 laps on one track without changing anything.
  5. Adjust one setting, then repeat.

Beware of tinkering endlessly. Changing everything each session makes it impossible to know what is helping. Also note that tracks can feel different: a short, tight circuit tempts you to push every corner, and one rider admitted sliding out repeatedly there by overdriving.

For up-to-date patch information, check the official Motocross The Game page on Steam for announcements and update notes, since camera options may be renamed or expanded.

FAQ

What is the best FOV for Motocross The Game camera settings?

One experienced player uses 120 on both onboard cameras and finds it gives the best awareness. Others may prefer 115 or lower. Test for several laps and pick what feels comfortable.

Can I set different FOV values for each first-person camera?

Yes. According to player reports, the FOV slider applies to Onboard 1 and Onboard 2 separately, so you can set them independently or match them.

Do camera presets change in updates?

Likely, yes. The game is still receiving patches after launch, and creators have noted new presets being added. Recheck your options after each update.

Should I use first person or third person?

Either works. Third person helps when learning layouts, while first person can improve your sense of speed. Choose whichever keeps your inputs smooth.